Connecting Landisk To Your Network - V-Gear LANDISK Manual Del Usuario

L D
AN
User Manual

2.4 Connecting LANDISK to your Network

Step 1. Connect power adapter to the receptor at
back panel of the LANDISK and then plug the other
end of the power adapter to a wall outlet or power
strip.
Step 2. Connect the network cable to LAN port on
the back panel of the LANDISK.
Step 3. Connect the other end of the network cable to LAN port located on your Switch Hub or
Router.
Note: The LAN Port on the LANDISK is Auto-MDI/MDIX,you can also connect the network cable
directly to the Lan port on your computer.It is not necessary to instead of crossover network cable
for direct link.
ISK
10 10
Keep OFF