For Daily Use; Switching On And Off; Channel Selection; Using The Channel Up/Down Keys - TechniSat Digital HD Serie Manual De Instrucciones

Position B/Option B
> Use the arrow keys up/down to highlight the satellite you wish to receive at the DiSEqC set-
ting Position B/Option B and confi rm by pressing OK. In the next step, you should check on
the correct confi guration of your antenna.
> If you wish to accept the settings entered, use the arrow keys up/down to highlight the fi eld
Yes, and confi rm by pressing OK.
Position A/Option B
> Use the arrow keys up/down to highlight the satellite you wish to receive at the DiSEqC set-
ting Position A/Option B and confi rm by pressing OK.
Position B/Option B
> Use the arrow keys up/down to highlight the satellite you wish to receive at the DiSEqC set-
ting Position B/Option B and confi rm by pressing OK. In the next step, you should check on
the correct confi guration of your antenna.
> If you wish to accept the settings entered, use the arrow keys up/down to highlight the fi eld
Yes, and confi rm by pressing OK.

For daily use

Switching on and off

> Press the On/Standby key either on the digital receiver or the remote control to switch the
receiver on.
> Press the same key again to switch the receiver off again.

Channel selection

Using the channel up/down keys

> Use the channel up/down keys on the remote control or on the receiver to move up or down
the list one channel slot at a time.
Return to the last channel selected
> Pressing the Back key on the remote control will take you back to the last channel selected.
> Press the key again to return to the channel previously selected.

Using the numeric keys

You may use the numeric keys to enter the desired channel number.
For example:
When entering a channel number consisting of several digits, you have approx. 3 seconds after
1
1, then 4
2, then 3, then 4
for channel 1
for channel 14
for channel 234
8