Power Supply - HIKVISION UD24041B Guia De Inicio Rapido

Transportation
● Keep the device in original or similar packaging while transporting it.
● Keep all wrappers after unpacking them for future use. In case of any
failure occurred, you need to return the device to the factory with the
original wrapper. Transportation without the original wrapper may
result in damage on the device and the company shall not take any
responsibilities.
● Do not drop the product or subject it to physical shock. Keep the
device away from magnetic interference.

Power Supply

● Please purchase the charger by yourself. Input voltage should meet the
Limited Power Source (5 VDC, 2 A) according to the IEC61010-1
standard. Please refer to technical specifications for detailed
information.
● Make sure the plug is properly connected to the power socket.
● DO NOT connect multiple devices to one power adapter, to avoid
over-heating or fire hazards caused by overload.
Battery
● Improper use or replacement of the battery may result in explosion
hazard. Replace with the same or equivalent type only. The battery type
is 18650, and the rated voltage and capacity is 3.6 VDC/3.3 Ah
(11.88Wh). Dispose of used batteries in conformance with the
instructions provided by the battery manufacturer.
● Do not charge other battery types with the supplied charger. Confirm
there is no flammable material within 2 m of the charger during
charging.
● For long-term storage of the battery, make sure it is fully charged every
half year to ensure the battery quality. Otherwise, damage may occur.
● DO NOT place the battery near heating or fire source. Avoid direct
sunlight.
● DO NOT swallow the battery to avoid chemical burns.
● DO NOT place the battery in the reach of children.
8