Assembly - Husky HDC302000 Guía De Uso Y Cuidado

Assembly

1
Installing the foot bolts
□ Have one person tilt the air compressor unit (A) forward
slightly to allow access to the foot bar. Secure the air
compressor unit (A) properly to ensure the air compressor unit
(A) does not tip over or fall forward on the person installing
the foot bolts.
□ Insert the foot bolt (AA) through the foot bar (1). The foot bolt
pad should be on the lower side of the foot bar.
□ Use the ratchet and 9/16 in. socket to tightly secure the
locknut (BB). Repeat with the other foot (AA).
A
1
AA
2
Installing the air filter
□ Screw the air filter (B) onto the pump air intake.
NOTE: Do not overtighten the filter. Over the life of
the unit, you will clean or replace the filter as needed.
B
BB
10