Motorola PMLN6759 Manual Del Usuario página 9

3. Clip the in-line PTT switch in a
convenient operating location.
4. Turn the radio off.
5. Connect the accessory connector to the
radio as shown in Figure 1.
6. Turn the radio on, adjusting the audio
volume to an appropriate level.
7. When the headset is connected to the
radio side connector, the radio's
speaker is muted and the audio is only
heard from the Temple Transducer
speakers.
8. Press and hold down the in-line PTT
button and begin speaking in order to
transmit.
9. Your radio will return to receiving mode
when you release the in-line PTT button
after you finish speaking.
10. Turn the radio off before removing the
accessory connector from the radio as
shown in Figure 2.
7