Conference Calls - RCA 25423 Guia Del Usuario

Basic Operation
Receiving a Transferred Call from Another Station
If a call is transferred to your station, the line indicator flashes red. To answer the call, press
that line button.
If you are on the line when a call is transferred to you, you will hear beeps to alert you
of the incoming call. Put your current call on hold by pressing Hold, and then pick up the
incoming call by pressing the corresponding line button.
NOTE: During the transfer, the only two stations that can access the line are: a) the
transferring station, or; b) the station receiving the transfer.
VERY IMPORTANT: To transfer a call from one station to another, the two stations should be
connected to the same line.
Message Waiting
Provide your phone company offers voice messaging service and you subscribe to it, the
New Message indicator flashes when the phone is not in use to indicate there is a message
waiting. Also, from the display, you can find which line has message waiting. The indicator
stops flashing after the message is reviewed.
NOTE: Not applicable to Model 25423.
Privacy
While in use, a line can be secured so that no one else can listen to the conversation. This
feature only applies to 25423, 25424, 25425, 25413, 25414, 25415, 25403 and 25404
phones. However, other phone which are not compatible with these models can still access
the line.
Providing Privacy
At any time during a conversation, you can use the privacy feature to secure the line.
1. While on a line, press the Privacy button. The indicator turns on.
2. To cancel, press Privacy again or hang up.
NOTE: If you put a call on hold while in privacy mode, no one but you can access the line on
hold.

Conference Calls

This feature allows you to have a 3-way conversation using any combination of 2 lines.
To connect and conference
1. To make a call, press the line you want and dial the telephone number. If you already
have someone on the line, skip to step 2.
2. Press the Hold button to place the call on hold.
2