16. Ask for assistance to stand the assembled unit upright.
17. Insert the assembled drawer into the frame. Extend the Ball Bearing Slide Tracks on the Legs all the way
forward (including ball bearing cart). Then align the Slide Runners on the assembled drawer with the Slide
Tracks and push the drawer carefully inside until it stops.
NOTE: If the drawer does not go in smoothly, please take it out and repeat the step. If you need to remove
the drawer, please pull the drawer all the way out, then simultaneously push the plastic release lever of the
ball bearing slides up on one side and down on the other side, and then pull it completely out.
ASSEMBLY INSTRUCTIONS
16
B
C