Publicidad
Operation
Manual
1.
Control Panel Window
4. T
ouch Set &↑↓
Choose °C or °F Read-out
Attention
For a cold peel transfer paper, please wait 10~15 sec and peel off paper. As for a hot peel paper,
Please peel off paper at once after printing. (had better peel paper in diagonal line)
Successful printing require right time, temp as well as pressure, therefore better to have a try first.
Problems and solves
Machine is still of when power switch is on
Pressure know is hard to adjust
Heating Platen does not work
Hard to lift heating platen
Alarm does not sound
2.
P-1: Temp. Setting Mode.
Touch Set &↑↓ key to set
desire a temp.
5.
P-4: Auto-off Mode
Touch set &↑↓ keys to set
auto-off time with 0-120 min
range(0=Auto-off disabled)
Power connector is loosed or fuse broken
Add a little lubricating oil into screw connection
Faulty in controller/ solid relay/ heating element
Ounterclockwise adjust pressure knob
Controller problem or time switch broken
3.
P-2: Time Setting Mode.
Touch Set &↑↓ key to set desire a time.
6.
Touch Set to finish
all settings
2
Warranty:
Thank you for selecting our
products, you are entitled
to one year free warranty
service for our products.
For without our local repair
outlets
or
overseas,
we
only
could
provide
replacement
parts
&
remote assistance, to guide
customers to make own
maintenance; All exceeds
warranty period we
will
still
provide
technical
supports and maintenance
guidance.
For
following
cases,
we
may charge some cost at
its
discretion.
The damage or failure is
caused
by
not
correct
operations, maintenance or
improper transport, or not
operate
according
to
requirements.
Note:
Publicidad
