Sony HVBK-1520 Instrucciones De Instalación página 27

UP/CROSS CONVERTER [Up/Cross]:
Settings relating to the up-conversion/
cross-conversion function
TIME CODE [> Time
Code]: Set
timecode.
AUTO ASPECT [> Auto Aspct]: Select
whether to handle the aspect ratio
discriminator signal included in the SD
signal.
Note
When this is set to ON but no aspect ratio
discriminator signal is detected, follows the
MANUAL ASPECT setting.
MANUAL ASPECT [>Manual Asp]:
Select the aspect ratio conversion
method for up-conversion.
For details of the conversion from 4:3 to 16:9,
see page 30.
9P TC PHASE [>>
9P TC Phs]:
Select
reference for 9-
pin status
sense
timecode.
EMBED VITC [>>
Embd VITC]:
Select
timecode
embedded in
HD-SDI output
for up-
conversion.
Description of settings
*
SD [>>> SD]: Align with SD phase.
HD [>>> HD]: Align with HD phase.
*
LTC [>>> LTC]: Use LTC as VITC to be
embedded in the HD-SDI output.
VITC [>>> VITC]: Use VITC as VITC to be
embedded in the HD-SDI output.
*
ON [>> ON]: The aspect ratio flags in the
SD signal, and automatically set
display mode for up-conversion.
OFF [>> OFF]: The MANUAL ASPECT
setting. (Ignore aspect ratio flags in
the SD signal.)
* EDGE-CROP [>> Edge Crop]: Use
edge crop mode for input SD
a)
signals.
LETTER BOX [>> L-Box]: Use letterbox
mode for input SD signals.
SQUEEZE [>> Squeeze]: Use squeeze
mode for input SD signals.
b)
c)
Overview 27