How To Connect Electricity - GE AKLK18 Manual Del Usuario

IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third
(ground) prong from the power cord. For personal safety,
this appliance must be properly grounded.
DO NOT use an adapter plug with this appliance.
The power cord of this appliance is equipped with a
3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the possibility
of electric shock hazard from this appliance.
Power cord includes a current interrupter device. A
test and reset button is provided on the plug case. The
device should be tested on a periodic basis by first
pressing the TEST button and then the RESET button
while plugged into the outlet. If the TEST button does
not trip or if the RESET button will not stay engaged,
discontinue use of the air conditioner and contact a
qualified service technician.
WARNING
Chemical Burn Hazard. Keep batteries away from children.
battery is swallowed or enters the body, it can cause
severe internal burns and can lead to death in as
little as 2 hours. Always completely secure the
battery compartment. If the battery compartment
does not close securely, stop using the product,
remove the batteries, and keep it away from children.
IMPORTANT
NOTE:This air conditioner is designed to be operated
under condition as follows and performance may be
reduced outside of these operating temperatures.
Cooling Outdoor Temp:
Operation
Indoor Temp:
Heating Outdoor Temp:
Operation
Indoor Temp:
READ AND SAVE THESE INSTRUCTIONS
4
64-109 C (64-125
for special tropical models)
62-90 C
C
C
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Where a 2-prong wall outlet is encountered, it is your
personal responsibility and obligation to have it replaced
with a properly grounded 3-prong wall outlet.
The air conditioner should always be plugged into its
own individual electrical outlet which has a voltage rating
that matches the rating plate.
This provides the best performance and also prevents
overloading house wiring circuits which could cause a
fire hazard from overheated wires.
See the Installation Instructions, Electrical
Requirements section for specific electrical connection
requirements.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
keeping them away from children.
Even used cells may cause injury.
C
49-5000525 Rev. 0