Kenwood LS-K731 Manual De Instrucciones página 4

Sistema de altavoces
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
Connections
Each speaker of this speaker system can be
connected to either the left or right output
channel of the amplifi er.
CAUTION
Be sure to turn off your amplifi er before
connecting or disconnecting speakers.
Loosen
Insert the
conductor
Right
Wire with black line
Speaker terminals
(amplifi er or receiver)
Note on connection
• Never short the (+) and (–) speaker wire's conductors
together.
• Do not reverse L and R or (+) and (–) connections.
Reversal of sides or polarities may result in unnatural,
incorrectly positioned sound.
LS-K731̲En.indd 4
LS-K731̲En.indd 4
The speaker wire can also be connected to
the speaker by using banana plugs which are
commercially available in audio stores.
To use the banana plug connection, tighten the
screws on the speaker terminals before inserting
the banana plug.
Secure
Maintenance
Maintenance of the unit
When the speaker cabinets get dirty, wipe with a soft,
dry cloth.
Do not use thinner, benzine, alcohol, etc. for these
agents may cause discoloration.
In regard to contact cleaner
Left
Do not use contact cleaners because it could cause
a malfunction. Be specially careful not to use contact
cleaners containing oil, for they may deform the
plastic component.
Specifi cations
System .......................... 2-Way 2-Speaker System
Enclosure .................................... Bass-Refl ex type
Loudspeakers
Woofer............. 110 mm (4-1/2 ") Cone type
Tweeter ............... 20 mm (3/4 ") Dome type
Nominal Impedance .........................................6 Ω
Maximum Input Power .................................. 80 W
Sensitivity .....................................83 dB/W at 1 m
Frequency Response ............... 50 Hz – 65,000 Hz
Crossover Frequency ............................ 13,000 Hz
Dimensions ................Width: 147 mm (5-13/16 ")
Net Weight .......................... 3.5 kg (7.72lb) / piece
Note:
KENWOOD follows a policy of continuous advancements
in development. For this reason specifi cations may be
changed without notice.
Connections
(Magnetically shielded)
Height: 252 mm (9-15/16 ")
Depth: 244 mm (9-5/8 ")
2011/09/20 16:59:32
2011/09/20 16:59:32

Publicidad

Tabla de contenido
loading

Tabla de contenido