Eshine 9184 Manual Del Usuario página 6

3.
The main plug of the 12V power supply must be connected to
a specially marked side of LED strip with IR sensor.
This strip is labeled with the following note: "Connect power". On
the marked side, please connect the power cord (see Pic.4).
Pic.4: Connection of the power plug to the bar with IR sensor
Note: If you connect the power cord on the wrong side or wrong
led bar, which is not marked, NO IR sensor ("hand wave on/off")
will be functional, but light can be operated with regular switch or
just plug/unplug adapter.
6