Provision ISR BX-325CS Manual Del Usuario página 4

Structure and Components
3. Case H
Back focus screw
Lens
Lens mount ring
Tailplate Sketch
8
7
5
Mount screw
Tailplate
2
5
4
3
1
6
Details:
① Electronic Switch
IRIS- Electronic shutter speed- default AUTO
On- Auto electronic shutter between 1/5-1/10000
Off- Fix electronic shutter set for 1/50
BLC- Back Light Compensation- default OFF
Adjusts the image to compensate for areas that are
overshadowed caused by majority of brighter areas.
AGC- Auto Gain Control- default HIGH
Increasing the video signal when there is low amount of light
to achieve a brighter image.
AWB- Auto White Balance- always ON
② DC/VIDEO Drive Switch
③ Socket Auto Iris Lens
④ Video out
⑤ Lens Level Knob
⑥ Power Supply Socket
⑦ Power Indicator Light
⑧Audio Socket
Operation Steps
⑴ Confirm that the power supply for the camera is correct.
⑵ IInstall the Lens you have chosen onto the "Lens Mount
ring". In case of Auto Iris Lens, please connect the Lens
cable to the "Auto Iris Socket".
⑶ Connect "Video out" ④ of the camera to the monitor or other
video equipments (DVR) with a 75 ohm cable (RG59).
⑷ When using Auto Iris Lens, please make sure that on the
"Electronic shutter switch" ① the Iris switch is "ON".
(a) If the Lens is DC driven, switch "DC/VIDEO" ② should
be switched to DC, and the optimal image effect can be
achieved via adjusting "Level Knob" ⑤.
EN EN
6