Descargar Imprimir esta página

Dell PowerSwitch N4000 Serie Guía De Introducción página 196

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 291
サ ンプルセ ッ シ ョ ン
Easy Setup Wizard
メ モ :
SNMP
admin123
OOB
192.168.2.1
メ モ :
POST
(Unit 1-Waiting to select management unit)>
Applying Global configuration, please wait...
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch
configuration, and gets you up and running as quickly
as possible. You can skip the setup wizard, and enter
CLI mode to manually configure the switch. You must
respond to the next question to run the setup wizard
within 60 seconds, otherwise the system will continue
with normal operation using the default system
configuration. Note: You can exit the setup wizard at
any point by entering [ctrl+z].
Would you like to run the setup wizard (you must
answer this question within 60 seconds)? [Y/N] y
194
IP
root
IP
Dell Easy Setup Wizard
<Enter>
[ ]

Publicidad

loading

Este manual también es adecuado para:

N4032N4032fN4064N4064f