Kingston Technology MLWG2 Manual Del Usuario página 9

... Continued
Figure 8.1: Networks available for
bridging
If any changes were made during the setup process, the device will begin to update.
Alternatively, if no changes were made, you will be taken to the Homescreen. See page 9 for further instructions.
Once the update process is complete, the „Close' button will change from grey to blue.
Homescreen by tapping on the 'Close' button.
Note: Depending on your device's network configuration, you may need to connect to the MobileLite
Wireless G2 through your iOS device Wi-Fi settings.
Document No. 480-16FUM-001.A00
Connecting to MobileLite Wireless G2 will substitute your
iPad/iPhone‟s Internet connection with MobileLite Wireless‟s
wireless connection. In the third step, you are given the option to
connect to your Wi-Fi network via the „Bridge' function. This is a
function that allows you to maintain access to MobileLite
Wireless‟s content while connecting to a Wi-Fi Internet
connection.
Figure 8.2: Update process
Kingston MobileLite Wireless G2
See Figure 8.2.
Continue to the
Page 8 of 21