Synchronizing The Transmitter And Receiver - Silvercrest SFS 52 B2 Manual De Instrucciones

■
_289974_SFSS2B2_LB9.indb 16
Synchronizing the transmitter and
receiver
The transmitter and receiver of this wireless
doorbell system can communicate with each
other via a number of different codings . This
means that you can operate up to 5 transmit-
ters with one receiver . In addition, you can
expand the wireless doorbell system with any
number of receivers . However, this is only
possible if the transmitter and receiver within
a system are working on the same frequency .
For this, you must synchronize the devices as
follows:
Press the synchronization button
♦
the receiver .
Now press the doorbell button 8 on the
♦
transmitter .
If the synchronization is successful, the receiver
notifies you of the programmed call signal .
Should the receiver not react as described,
repeat the synchronization .
16 │ US - EN
6 on
SFS 52 B2
25.08.17 09:3