Haier HDT18PA Manual Del Usuario página 21

All manuals and user guides at all-guides.com
HDT18PA-MANUAL 10/22/01
Water
Draining Problem:
• Drain hose may be removed from the back of the unit.
Check if the drain hose is removed. It may have come loose and need
to be tightened.
• Check the level of the drain hose. The drain hose should be positioned above the
drain in order to drain properly.
• If the drain hose is bent or shrunken, it may affect water draining.
• If water can not be drained out smoothly, the dishwasher operation will be
disturbed and it may stop in the middle of the cycle.
Water is not pumping out of the tub:
• Drain is clogged.
Make sure that your kitchen sink is draining well. If not, call a plumber.
Dishwasher is leaking:
• Dishwasher is not leveled properly.
You need to place the dishwasher on the flat hard surface. Avoid uneven surface.
• The tub may be cracked.
If the tub is cracked then you need to call for service.
Dishwasher will not fill:
• Check water supply.
Make sure that water supply is at "On" position instead of "Off" position.
• Check water pressure.
Make sure the water pressure is at proper level. (Between 20 – 120 PSI)
Water found under the filter:
This is normal. After water is drained out, a small amount of water found under the
filter area due to different settings and shapes of food containers in the lower rack.
The water will be drained out first in next wash operation automatically.
11:46 AM Page 21
English
20