Uline H-7160 Manual De Instrucciones página 3

SET TIME ALARM
1. Hold the ALARM button to enter alarm time set mode.
2. Press the ▲ or ▼ buttons to adjust alarm time.
3. Press the ALARM button to confirm adjustments and
move to the next item.
ALARM TIME SETTING ORDER:
1. Hours 2. Minutes
4. Press and release the ALARM button to exit, or wait
20 seconds without pressing buttons to return to
normal time display.
ACTIVATE/DEACTIVATE ALARM
• Press and release the ALARM button once to view
alarm time.
• Press and release the ALARM button again to activate
the alarm. Once activated the bell icon
• Press and release the ALARM button again to
deactivate the alarm. The bell icon will disappear.
SNOOZE (SILENCES ALARM TEMPORARILY)
• When alarm sounds, press and release LIGHT/SNOOZE
button to silence the alarm for 10 minutes.
• The alarm icon Zz will flash.
• In snooze mode, press any button to stop the alarm
for one day.
NOTE: The alarm is crescendo sound. Alarm will
sound for 2 minutes, then shut off completely.
FORECAST ICONS
The weather station uses changing atmospheric
pressure to predict weather conditions for the next
12 hours with 70-75% accuracy.
NOTE: Please allow 7 days for barometer
calibration.
NOTE: The snowy icon appears when the
temperature is below 32°F and the forecast
is rainy or stormy. (See Figure 2)
Figure 2
Sunny Partly Cloudy
Sunny
PAGE 3 OF 12
OPERATION CONTINUED
appears.
Rainy Stormy Snowy
FORECAST TREND INDICATOR
TENDENCY TENDENCY
RISING PRESSURE STEADY PRESSURE
Weather is
expected to expected to
improve. stay the same.
HEAT INDEX/DEW POINT
• Press the HEAT/DEW button once to view heat index.
• Press the HEAT/DEW button twice to view dew point.
ADJUST BACKLIGHT
When using AC power:
• Press and release the HI/LOW/OFF button to adjust
the backlight.
When using battery power only:
• Press and release the HI/LOW/OFF button for
10 second backlight.
VIEW/RESET MIN/MAX VALUES
The station automatically resets minimum and maximum
values daily at midnight (12:00 AM).
• Press and release the ▼ button to view
minimum values.
• Hold the ▼ button for 5 seconds to reset
minimum values.
• Press and release the ▲ button to view
maximum values.
• Hold the ▲ button for 5 seconds to reset
maximum values.
SEARCH FOR OUTDOOR SENSOR
• Hold the HEAT/DEW button for 3 seconds to search
for the outdoor sensor.
• The signal strength icon will animate until sensor
signal is received or for 3 minutes if no signal is
available. (See Figure 3)
Figure 3
TENDENCY
FALLING PRESSURE
Weather is Weather is
expected to
worsen.
0621 IH-7160