Safety Information - Kobalt SGY-A14 Manual Del Usuario

Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-888-3KOBALT, 8 a.m. - 8 p.m., EST, Monday - Friday.
• The welding helmet is not suitable for overhead welding applications, laser welding or laser
cutting applications.
• The recommended operating temperature range for the welding lens is -10°C to +65°C (14°F~
149°F ). Do not use this device beyond these temperature limits.
• Wear impact-resistant, primary eye protection, spectacles or goggles that meet current ANSI
specifications at all times when using this welding helmet.
• Avoid work positions that would expose unprotected areas of the body to sparks, spatter,
direct and/or reflection radiation. Use adequate protection if exposure cannot be avoided.
• The passive lens should always be used with original inner and outer cover lenses. Protection
could be compromised if unapproved modifications are made.
• Never place the helmet on or near hot surfaces.
• Keep helmet and all of its components out of the reach of children.
• The manufacturer is not responsible for modifications to the passive lens or the use of the lens
in any other manufacturer's helmet.
• Failure to follow these warnings and operating instructions could result in severe personal
injury.
3