Tabla de contenido
Publicidad
EN
PLEASE CAREFULLY READ THIS MANUAL
AND KEEP IT IN A SAFE PLACE.
AVERTISSEMENT
• This product is for people whose age is over 14, kids should assemble under the guidance of adults.
ENTRETIEN
1. Keep the product far away from sources of ignition and water ta prevent any damage.
2. Don't use any chemical reagents like alcohol, ammonia water or window cleanser ta clean the
product.
3. Use clean and soft fabric ta clean the product if necessary.
Attention :
• Store the small parts away after opening the package prevent losing when
assembling.
• Make sure that the numbers match to their corresponding number while
assembling.
• Additional pieces can be used as spare parts.
• For some difficult assembling steps, you can scan the QR codes for
assembly videos.
• Use the sandpaper to polish the pieces if needed.
• Please keep the manual well for future reference.
CUSTOMER SERVICE
Facebook: RokrOfficial
Please contact us on Facebook, our online customer service group will try thier best ta help you
salve any problems there. We offer online instruction support, you can find the latest version on
our website: www.robotime.com.
6
FAQ
PROBLEM
CAUSE
1. The friction between boards is
The assembly
excessive.
could not rotate
2. The connecting points are not
freely.
smooth.
1. The slot is not connected to
The marble
the end correctly.
gets stuck in
2. The track is not inclined
the track.
appropriately.
TIPS
Glue is needed if
it's not firm enough
after assembly, which
should be prepared
by yourself.s
PARTS LIST
Shaft
Item
Steel Shaft
Sleeve
Number
P1
P2
Illustration
Quantity
10
4
Make sure the gears are
appropriately engaged with
each other.
Polish the parts with
sandpaper.
Make sure the parts could
rotate freely.
SOLUTION
1. Wax related parts.
2. Polish the connecting points with
sandpaper and make sure each part is
well assembled.
1. Press the slot ta connect it properly with
the end.
2. Check if the tracks are engaged with
each other appropriately and make sure
each parts are well assembled.
Press the slot to the end.
Isolation
Screw
Screw Nut
Steel Ball
Column
P3
P4
P5
P6
1
1
2
10
Perspective changed. Rotate
Assemble the parts
the product based on the
symmetrically
direction of arrow.
Special attention
in assembly.
Wax or lubricant needed
Step 1
Complete 2 pieces.
7
Wax
P7
1
Step 2
Publicidad
Tabla de contenido
