ViewSonic VPC12-WPO Guia De Inicio Rapido página 4

Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with
Directive 2011/65/EU of the European Parliament and the Council on
restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHS2 Directive) and is deemed to comply with
the maximum concentration values issued by the European Technical
Adaptation Committee (TAC) as shown below:
Substance
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent Chromium (Cr 6+ )
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE) 0.1%
**Certain components of products as stated above are exempted under the
Annex III of the RoHS2 Directives as noted below:
Examples of exempted components are:
1. Lead in glass of cathode ray tubes
2. Lead in glass of fluorescent tubes not exceeding 0.2% by weight
3. Lead as an alloying element in aluminium containing up to 0.4% lead by
weight
4. Copper alloy containing up to 4% lead by weight
5. Lead in high melting temperature type solders (i.e. lead-based alloys
containing 85% by weight or more lead)
6. Electrical and electronic components containing lead in a glass or ceramic
other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or
in a glass or ceramic matrix compound.
7. Lead as an alloying element in steel for machining purposes and in galva
nized steel containing up to 0.35% lead by weight.
8. Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or
250V DC or higher.
9. Cadmium and its compounds in electrical contacts.
Actual
Proposed Maximum
Concentration
Concentration
0.1% < 0.1%
0.1% < 0.1%
0.01% < 0.01%
0.1% < 0.1%
0.1% < 0.1%
< 0.1%
EU Regulation (EC) No 1907/2006 (REACH) Compliance:
The substance(s) listed below may be contained in the products above
the threshold level of 0.1%(w/w) by weight of the listed article.
Substance
1, 2-dimethoxyethane, ethylene glycol
dimethyl ether (EGDME)
Specifications
5
IO ports
Rating
Operation Temperature
Conditions Humidity
Altitude
Storage Temperature
Conditions Humidity
Altitude
Dimensions Physical(mm)
Weight Physical(kg)
Power consumption
Frequency Range and
Output Power (Max.)
CAS no. Where use in article
110-71-4 cell
1 x HDMI
1 x LAN
2 x USB 3.0, 2 x USB 2.0
1 x Line out
1 x Microphone
1 x IR
12V 5.0A
23°F to 113°F (-5°C to 45°C)
10% ~ 90% non-condensing
0 meter to +2000 meters above sea level
-4°F to 158°F (-20°C to 70°C)
10% ~ 90% non-condensing
0 meter to +2000 meters above sea level
180 x 119 x 30
0.84
60W
2402 to 2480 MHz(BT) 2.0 dBm
2402 to 2480 MHz(LE) 3.73 dBm
2412 to 2472 MHz 17.41 dBm
5150 to 5250 MHz 18.94 dBm
5250 to 5350 MHz 18.94 dBm
5470 to 5725 MHz 18.94 dBm