Sinbo SFH 3373 Manual De Instrucciones página 9

ASSEMBLY INSTRUCT‹ONS
• Place the radiator body upside-down on a scratch-free location, make sure it is stable
and will not fall.
• Do not store appliance while it is still hot.
• To attach the castor mounting plate to the radiator body, you should insert the threaded
ends of the U bolt in the holes on the castor mounting plate.
• Screw the wing nuts back to the U bolt and fasten the wing nut properly.
USAGE:
1. This is one power switch, you can adjust them on your requirement.
2. Please make sure that the rated voltage is suitable and the rated electric current is
not lower than 10A.
3. When using, turn the temperature switch deasil to the max position and the room
temperature will rise higher and higher.
4. During using, if you feel the room temperature is too high and you want lower
temperature just adjust it to "middle" or "low" position.
5. During using, the radiator will keep the required temperature, when the room
temperature gets to the require temperature, the radiator will stop automatically. When
the room temperature is lower than the required temperature, the radiator will start
working automatically.
6. Turn off the temperature switches at the same time, the indicator light will be off.
- 8 -