iKEY-AUDIO RM3 Manual De Instrucciones página 8

SD Card Connection
The RM3 comes with a 1 GB SD card which
stores the recordings. Before turning on the
unit, ensure the card is inserted into the slot (15)
located on the front of the RM3. To connect the
card, push the card completely in the slot until it
clicks into place.
Note: DO NOT FORCE THE CARD IN. To remove
the card, slightly push the bottom of the card. It
will slide out partially, and then can be pulled out.
Using the USB Drive
On the front of the device is a USB drive slot (16) where a USB
memory stick can be connected. The RM3 can both read files for
playback and record directly to a USB device connected to this
area.
The RM3 unit will only interact with one memory device at a time,
and the USB drive gets priority over the SD card. What this means
is that when a USB memory stick is connected, only files stored on that
device will be viewable. As well, all recordings will be stored on just the USB
drive when it is connected.
When there is no USB drive connected, the RM3 uses the SD card to read
files and store recordings.
Turning on the Unit
Now that the SD card and power source are connected, the unit can be
turned on by setting the POWER (1) button.
Connections and System Control
7
Conexiones y Control de sistema • Connexions & Utilisation • Anschlüsse und Systemeinstellungen
After the unit is turned on, a menu appears listing all of the files and folders
on the memory device. Use the RECORD LEVEL/SEARCH (11) jog wheel to
scroll through these folders & files.
Scrolling clockwise will search downwards through the file menu & scroll-
ing counter clockwise will search upwards. Press PLAY/PAUSE (13) when
a folder is highlighted to view its contents. All recordings are stored in the
folder labeled RECORDS in the iKEY menu. Press the STOP/BACK (12) but-
ton to return to the previous folder.
Insert card the way
it is shown
To engage a file, press the PLAY/PAUSE button when it is highlighted in the
file menu (*Note: When connecting a new card no files will be viewable as no
media is yet on the device).
Pressing this button again will pause the playing file. To fast-forward within a
track, scroll the RECORD LEVEL/SEARCH jog wheel clockwise. Conversely,
to rewind, scroll the jog wheel counterclockwise.
To stop a file that is playing and return the unit to the file menu, press the
STOP/BACK (12) button.
Navigating the RM3
Playing Files
Play Mode
File number
SD card usage
File name
Track Display
(Unit in Play Mode)
File format
Track time
Time mode