Scosche LOC2SL Manual Del Usuario página 8

Adaptador complementario para amplificador
Ocultar thumbs Ver también para LOC2SL:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING
NO SOUND:
• Check and verify all electrical and signal connections.
- Speaker wire connections to LOC2SL input
- Audio RCA cable connections from LOC2SL output
to amplifier.
• Check that amplifier is turning on when stereo is on.
- Verify remote turn-on output (blue/white wire) from
LOC2SL is connected to amplifier
- Verify that LOC2SL is receiving +12V on yellow wire and
black wire is connected to chassis ground.
Note: If all of the above conditions are met, it may be
necessary to connect the amplifer's remote turn-on
terminal/wire directly to the car stereo or ignition.
• Check gain adjustment levels on LOC2SL
• (If using remote volume control) check that the knob is not
turned all the way down.
• If still no sound call tech support at 1-800-363-4490 x1.
For complete warranty details,
please visit us at www.scosche.com
or call (800) 363-4490
8

Publicidad

Tabla de contenido
loading

Tabla de contenido