Nexxt Solutions NHB-W310 Guia Del Usuario página 6

Power on the smart bulb. You must connect to a 2.4GHz
Wi-Fi network. Enter your network password. Make sure
you enter the correct password, otherwise the device will
not connect.
Step 2
9:41 AM 60 %
9:41 AM
Make sure the bulb is blinking. If it fails to blink, reset the
bulb. Turn it off from the switch, wait 5 seconds before
turning it back on again. Tap on Confirm the light blinks
rapidly.
Step 3
60 % 9:41 AM 60 %