Before Using For The First Time; Assembly Instructions - Bella 14937 Manual De Instrucciones Y Guía De Recetas

Before Using for the First Time

The juice extractor comes almost completely assembled in the box.
1. Your extractor may be shipped with a protective cardboard insert between the clear cover and the blade
basket. Remove this and any other protective packaging before using your juice extractor.
2. Following the disassembly instructions, remove the food pusher from the feed tube, then the cover, juice
bowl with stainless steel blade basket.
3. Wash all removable parts (food pusher, clear cover, juice bowl, pulp basket, and juice pitcher with lid) in
warm water with a biodegradable, non-abrasive liquid detergent. Rinse well and air-dry. This will eliminate
any traces of dust or residue from manufacturing
or shipping.
Caution: Use care when handling the blade basket. Hold the basket's rim only.
Do not touch the cutter blades on the bottom of the basket. The cutter blades are very sharp!
Caution: Never rinse or immerse the motor base in water or any other liquid.

Assembly Instructions

Warning: Always make sure the juice extractor is unplugged before starting assembly.
Important: The juice extractor is equipped with a safety system that prevents the extractor from being turned on
unless the unit is completely and properly assembled.
1. Rotate the locking clamp so that it sits at the front of the base (see figure 2).
Figure 2
2. Place the juice bowl on top of the motor base so that the juice spout fits into the cut out at the front of the
base (see figure 3).
Caution: Use care when handling the stainless steel blade basket.
Hold the basket's rim only. Do not touch the cutter blades on the bottom of the basket. The cutter blades
are very sharp!
3. Align the arrow on the blade basket base and motor hub in the center of the juice bowl. (See Figure 3.)
Press down on the blade basket's outer rim until it drops into place and is securely seated. Gently rotate
the blade basket to ensure that it turns freely.
If initially it fails to seat, this should slip it into place. Double check by pressing down on the rim and
spinning it again.
14937_BELLA-700W Juicer White_Macy's IM R1.indd 5
Align the arrows
from the blade onto
the motor base
Figure 3
5
Figure 4
2019-10-02 4:17 PM