Cequent Towing Products TOW READY 63126 Instrucciones De Instalación

WARNING: DO NOT USE THIS BIKE CARRIER ON A TRAILER OR
5th WHEEL R.V.
INSTALLATION INSTRUCTIONS:
1. Assemble both tubular sections together as shown in
Diagram 1. Fasten together with the pan head bolt
provided. Securely tighten bolt.
2. Slide main support tube into collar bracket in orientation
shown.
3. Loosely install two ½" hex bolts through holes in collar
bracket and tube. Install locknuts.
4. Attach shank tube to collar bracket as shown using two ½"
hex bolts and locknuts.
5. Tighten all ½" hex bolts to 75 ft-lb.
Check bolts periodically to ensure bolts and locknuts are
secure.
6. Place bike rack into your receiver hitch. Diagram 2.
7. Use appropriate hole in shank tube to fit rack as close to the
vehicle as possible and secure rack with pin and clip.
LOADING BIKES ONTO CARRIER:
NOTE: The position of bike can vary depending on the number of
bikes loaded on rack. See Diagram 3 for bike mounting options.
1. First, remove the top plate by loosening the two plastic knobs.
2. Load one bike into the first "V-Groove" (closest to vehicle) so the
horizontal seat tube of the bike rests on the rubber lined "V-
Groove". Adjust position of bike to find its center of gravity.
3. Position the next bike into the middle "V-Groove" so the handle
bars face in opposite direction.
4. Position the third bike into the last "V-Groove" so the handle
bars face in the opposite direction of middle bike.
5. Replace top plate and tighten knobs evenly.
IMPORTANT NOTES:
1. To prevent the front wheels and handlebars from moving
during transport, we recommend a nylon strap or a
bungee cord, routed through the bike wheel and around
the bike frame.
2. To lock bikes onto your bike carrier, use a standard
padlock through the holes in the top plates. We also
recommend running a lock cable from the padlock through
the front wheels to secure quick release wheels to bike
carrier.
3. Your bike rack assembly may also be secured to your
vehicle using a locking hitch pin if desired.
Cequent Towing Products - Plymouth, MI
Technical Service: (888) 521-0510
www.towready.com
ITEM: 63126
DESCRIPTION: 3 PLACE BIKE CARRIER
Page 1 of 6
Top Plate
Pan Head
Bolt
Clip
Pin
Shank
Tube
Diagram 1
Receiver
Clip
Hitch
Pin
Diagram 2
Diagram 3
63126N 4-25-07 Rev A
Plastic
Knob
Main Support
Tube
Hex Nut
Collar
Bracket
Hex Bolt
Single Bike
Two Bikes
Three Bikes