Connection Configuration; The System - Harman JBL Professional VL6A Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

XLR Connectors:
PIN 2
POSITIVE
PIN 3
NEGATIVE
PIN 1
EARTH
PIN 2
POSITIVE
Energy connector:
2- BUMPER:
Auxiliary Fixing
Points
The Bumper is a lifting grate, it has been developed in steel to withstand all the loading conditions (assembly)
specified in this manual. Never exceed the number of boxes specified in this manual.
It is important to remember that the system should only be hoisted through your Bumper. The accessories used in
your installation such as straps, shackles, chains, hoists, load rod and etc. are the responsibility of the user; JBL is not
responsible for these accessories that are not provided by it. JBL recommends that these accessories support the weight of
the system with a safety factor (7:1).

CONNECTION CONFIGURATION

FEMALE XLR PLUG
BALANCED
PIN 1
EARTH
PIN 3
NEGATIVE
Auxiliary Fixing
Points
M 8 Bushing Attachment points
MALE XLR PLUG
BALANCED
PIN 1
EARTH
POSITIVE
PIN 3
NEGATIVE
The power cord is supplied with the
product VL6A;
The parallel connection cable does not
accompany the product, the installation of this
cable must be responsibility of the installer;
The cable-mounting connectors are
supplied with the product and must meet the
mounting specifications shown in the figure
below. (3x1.5mm² cylindrical PP cable).
THE VL6A SYSTEM
Lifting Holes (Ø 20 mm)
21
PIN 2
POSITIVE
PIN 3
NEGATIVE
PIN 1
EARTH
PIN 2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Jbl vl8a

Tabla de contenido