Hama YUV Selector AV-760 Manual Del Usuario página 5

Operation
1. Switch on the desired output component (TV, LCD, Plasma, Beamer etc).
2. If you want to use the device which is connected to input 1, press button
1. For the device at input 2, press button 2. The same method applies to
other devices.
3. Switch on the desired input component and use it as you normally would.
Note:
Only one device can be connected for each input.
Safety notes on the AV Selector
1. Protect the device from dirt, moisture and overheating and only use in dry
rooms. Avoid exposure to heat.
2. Do not open the device. Do not use if damaged. May only be repaired by a
specialist.
3. Only use dry and soft cloths for cleaning.
4. Warning! Keep this device, as with all electrical devices, out of the reach
of children.
5