Other Functio - AMS CT412 BT El Manual Del Propietario

Other functions
AUX mode
1. At Power on mode, the unit will switch to AUX
mode when the Tele-mute signal become low.
And return to previous mode when the
signal become high.
2. At Power off and ACC on mode, the unit will
turn on and switch to AUX mode if detected
Tele-mute signal. And turn off when the signal
become high.
3. At AUX mode, only the POWER, VOLUME
and SRC button can be used.
Timer function
If the device is switched on while the ignition
i s o n , i t t h e n s w i t c h e s o f f a n d o n a g a i n
automatically with the ignition. This is provided
that the A7 contact is connected to the terminal
15 of the vehicle. If the device is switched on
without the ignition by pressing "POWER", it
switches off again after 120 minutes to save the
battery. The device can then be switched on
again with "POWER".
Caution : When the radio is switched on, the
automatic antenna extends.
Therefore always switch off the device when the
situation requires it (e.g. in a station car wash).
You can stop this function in the MENU.
Mode Button (SRC)
Press the SRC button to change between
Radio, DISC (when disc is in), USB(when USB
connected), AUX play , BT audio.
Auxiliary Input
To access an auxiliary device:
1. Connect the portable audio player to the
AUX interface.
2. Press the SRC button to select Aux mode.
3. Press SRC again to cancel Aux mode and
go to the next mode
Password entered
Rotate the "VOLUME" knob to choose the
figures, press the " " button to enter the next
figure, press the " " button to change the
figure in case of error. Once the password is
fully displayed, press the "SEL" button at least
2 seconds to confirm, the radio switches to
the tuner mode. If the password is incorrect,
"ERROR" appears on the display. Please enter
the password again. If the user code is lost,
contact the After Sales Service.
PWD OFF/ON: Activating/Deactivating the
security code
When the unit is switched on, press the "SEL"
button several times to select "PWD OFF"
(ON) and turn the "VOLUME" knob to select
"ON" or "OFF": the password is activated or
deactivated. When set to "ON", the radio code
will be requested if you have disconnected
the permanent + (B + battery), you will have
to enter the password after each time the
battery is disconnected (the default password
EN-7
is "1234"). If you only turn off the ignition
(+15/30), the code will not be requested.PWD
NEW: Create a new password
You can set a new password for the unit:
press the "SEL" button several times
to select "PWD >OLD", enter your old
password, press the "SEL" button at least
2 seconds to confirm. If the old password is
incorrect,"ERROR" appears on the display,
please enter the password again. If the old
password is correctly entered, "NEW" is
displayed, enter your new password, press
the "SEL" button at least 2 seconds to
confirm. "AGN" is displayed, enter your new
password again and press the "SEL" button
at least 2 seconds to confirm; "SET OK" is
displayed: the code has been updated.