Chauvet Professional COLORADO 1-Quad Zoom VW Guía De Referencia Rápida página 3

EN
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
You can link up to 20 COLORado 1 Quad Zoom VW products at 120 VAC, 34 products at 208 VAC or 37 products at 230
VAC. Never exceed this number. Power linking cords can be purchased separately.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
• When using this product in an outdoor, IP65 type environment, be sure to use IP65 (or higher)
rated power/data cables, secure unused ports with attached IP65 covers, and secure the
display plate to the control panel.
DMX Linking
The COLORado 1 Quad Zoom VW will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX
Primer is available from
DMX Connection
The COLORado 1 Quad Zoom VW uses a 3- or 5-pin DMX data connection for its DMX personalities: STD.Y, STD.P,
STD.W, and UNO. See the User Manual for information about connecting and configuring the product for DMX operation.
When using this product in an outdoor, IP65 type environment, be sure to use IP65 (or higher) rated
power/data cables, secure unused ports with attached IP65 covers, and secure the display plate to
the control panel.
Note: For optimum control of the 16-bit dimming channels in the STD.Y, STD.P, and STD.W
personalities, be sure that both dimming curves in SET > DIM and SET > CURV are set to OFF
Master/Slave Connection
The COLORado 1 Quad Zoom VW uses the DMX data connection for its Master/Slave mode. See the User Manual for
information about connect and configure the product for master/slave operation.
2
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
www.chauvetprofessional.com.
Wire (Europe)
Brown
Blue
Green/Yellow
COLORado 1 Quad Zoom VW QRG Rev. 2
Screw Color
Yellow/Brass
Silver
Green