Urmet 1071/32 Manual Del Usuario página 9

ENGLISH
A 1071/32 temperature sensor can be used in com-
bination with a 1071/31 thermostat timer and at least
one relay (1071/13 or /14 or /11 or /12) to manage
heating (or air conditioning) in a single zone.
Up to 32 temperature sensors may be used to man-
age up to 32 zones in a home.
1. EVERY DAY USE
1.1 Indications of operation
The LED on the light indicates the current reference
temperature: Comfort , Day , Night
reference temperature will be Safe (or Protection, in
case of air conditioning) when all three LEDs are off.
The red LED by the side of the symbol indicates
that the sensor is controlling the heater in heating
mode.
This function is provided by the blue LED
operation in air conditioning mode.
1.2 Comfort / Day / Night temporary setting
with timer
An example of use of this function is when all the
windows need to be opened for cleaning. During this
time, it could be appropriate to turn the heating off in
DS1071-012
one or more zones.
Another example is to force Comfort temperature for
a short time in the bathroom.
In both cases, the temperature sensor can be forced
in a zone to a given reference temperature: Comfort
, Day , Night .
In order to do this, simply press the button
front (if this is enabled by the installer). The LED
corresponding to the selected reference temperature
will blink indicating that the timer was activated for
(1)
the predetermined time
program step will be ignored. Operation will return
. The
ordinary when the timer expires.
The timer default value is set during installation
(using IPerSet) typically to one hour.
It cannot be modified by means of the temperature
sensor button, but it may be easily extended or
for
shortened by means of the 1071/31 thermostat
timer.
(1)
In the particular case in which all LEDs are off after having
pressed the button several times (Safe or Protection), the timer
will not be activated and the setting will last to the next change of
program.
on the
During this time, any
9