Westinghouse Saf-T-Pan 01030-00 Instrucciones De Instalación

The Saf-T-Box ® and Saf-T-Pan ® are UL listed for fan support and exceed the requirements of the National
Electric Code for fans weighing up to 70 lbs. and lighting fixtures weighing up to 150 lbs. Included non-
metallic connector for use with 14-2 and 12-3 AWG sheathed cable.
INSTALLATION INSTRUCTIONS
Turn off electrical power at breaker!
1. Pull wire into electrical box through one of the knockouts and secure using the single clamp provided or other strain relief
supplied by the installer. Install the green grounding screw (provided) (Figure 1).
2. Mount electrical box to joist using the 4 wood screws provided (Figure 2).
NOTE: Mount heavy fixture and ceiling fans with the 10-24 x
weight fixtures and cover plates with the 8-32 screws
3. Mount fan bracket or fixture mounting bar (heavier fixtures or chandeliers) to the threaded post using the #10-24 x ¾"
screws provided, or mount cover plates or lightweight fixtures to the box ears using #8-32 screws (not provided). Complete
installation according to fan or fixture manufacturer's instructions.
Figure 1
Green
grounding screw
Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A.
www.westinghouselighting.com
, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF
are trademarks of Westinghouse Electric Corporation.
Used under license by Westinghouse Lighting.
All rights reserved.
Made in China
⁄ " bolts into the threaded inserts (Figure 3). Mount light
3
4
in the electrical box ears (Figure 3).
(not included)
Figure 2
4 Wood screw
Ceiling Fan and Fixture Support
MODELS 01030-00, 01030-11
01036-00, 01036-11
Figure 3
Box Ears
8-32 Screw
(not included)
10-24 Bolt
10-24 Bolt
8-32 Screw
(not included)