Klarstein AIRFLEX 360 Manual Del Usuario página 20

EN
20
Speed
While working, press this button for LOW, MIDDLE and HIGH speed selection. The
indicators show on the display accordingly.
Timer
There is no timer and related display show under the initial conditions. Press the
TIMER button, you can set the running time for this fan, Time setting as: 1H > 2H >
4H > 8H. When setting, the indicator and the figure shows on the display.
Horizontal Oscillation / Body Sensor
• Press this button for horizontal oscillation selection, with the following set
rules: 0 represents no horizontal oscillation and 60° > 90° > 180° > 360° show
accordingly horizontal oscillation angle, The indicators show on the display
accordingl. Press this button for 2.5 seconds to start infrared body sensor
function, with two "BI" sounds.
• Infrared body sensor function: 360° horizontal oscillation once starts, to figure
out the suitable angle for people stand and swing according to this angle for
the following work; on the other hand, the machine would restart to search
angle if the human signal is changed.
Vertical Oscillation
To set the vertical angle by pressing this button; Press once to start the 90° vertical
oscillation and stop it for on the second time.
Mode
The initial wind mode remains on "Normal" , press MODE button to switch
between " Normal" – "Natural" – " Sleeping" – " ECO", the LED indicator changes
accordingly. All mode have its accordingly LED indicator on the panel, but the
Normal mode.
Usage for remote control
One button battery (CR2032 3V) has been used in our remote control. Please insert
the battery to remote control tightly based on the direction of the po- larity. If it
does not use for a long time, please pull the battery out from the remote control.