Set Voicemail; Vip Melody - RCA 23200 Manual De Instrucciones

Set Voicemail

This feature enables you to access your cell phone voicemail service with the touch of a button using
the cordless handset.
1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol orbuttons to scroll to the SET VOICEMAIL menu.
6. Press prog/mute button to enter the menu. ENTER TEL NUMBER shows in the display.
7. Use the touch tone pad on the handset to enter the number you would normally dial to reach
your cell phone voicemail service provider.
8. Press the prog/mute button to save your number. You will hear a confirmation tone and it
returns to Handset Setting menu.
After programming is complete simply press the voicemail button on the handset. The number you
entered will automatically be dialed using the cell line.

VIP Melody

This feature allows you to assign a specific melody to someone you want to get your attention
when the person calls. When a VIP melody is assigned and that person calls, the unit rings the
normal ring for the first ring and then follows with VIP melody ring. You may choose from ten
different polyphonic melodies and may store up to 10 VIP records.
NOTE: This feature ONLY works when the following conditions are met.
1. You have subscribed to Caller ID.
2. You have your Caller ID record transferred to the memory. (Refer to Storing CID Records in Internal
Memory). "NO USER MEMORY" will show in display to remind you to do CID transfer first.
Storing VIP Melody
1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol or buttons to scroll to VIP MELODY menu.
6. Press prog/mute button to enter menu. VIP 1 **EMPTY** shows in the display.
NOTE: If the memory location is occupied, the memory location and stored melody and number
appear in the display. If the memory location is not being used, then "EMPTY" shows in the display.
All manuals and user guides at all-guides.com
Programming the Handset
19