HoMedics SCAN-1 Manual De Instrucciones Y Garantía página 6

Demo Button
The demonstration is approximately a 1
minute preset program to give you a quick idea
of what the Scandinavian massage recliner
functions feel like. The demo feature will start
with Steady Massage and then cycle through
all three programs, Up and Down, Side-to-Side
and Pulsating. While going through each
program, the demo will also cycle through
each of the three speeds and intensities While
in demo, you can select any other function and
it will automatically cancel the demo program.
Once demo is complete, the unit will automati-
cally turn off.
Note: You can engage the Demo program
by pressing the Demo button without first
pressing Power. You can stop the Demo
program by either pressing Demo, choosing
another function or by pressing Power.
Intensity
Allows you to adjust the strength of the
massage. Choose from Low (L) for relaxing,
Medium (M) for soothing and High (H) for
invigorating massage. The intensity of
the massage will be indicated by the LED
above the button. Push the button once to
change the intensity or continue to press the
button for each of the three intensity options.
Speed
Allows you to adjust the speed of the massage
in any function. Choose from Low (L) for
relaxing, Medium (M) for soothing and High
(H) for invigorating massage. The speed of
the massage will be indicated by the LED
above the button. Push the button once to
change the speed or continue to press the
button for each of the three speed options.
Zone Control
Customize your massage with five different body
zone options. Choose from Neck and Shoulders,
Upper Back, Lower Back, Seat and Calves. You
can select or deselect each zone by pressing
the appropriate button on the hand control. Each
zone has two LED's that will illuminate when
activated.
Heat
Activate heat to provide soothing relief to your
lower back. Heat will only function when selected
with a massage function. Heat will not work alone.
Note: When selecting the heat feature with
massaging action, there will be a slight
decrease in the strength of the massage output.
This adjustment is perfectly normal and should
not be considered as a defect.
Programs
We have created three massage styles to choose
from. P1 is Up and Down massage that repeated-
ly travels up and down your body. P2 is Side-to-
Side massage that repeatedly travels from the left
side to the right side of your body. P3 is Pulsating,
massage pulses on and off of your entire body at
once. Each program is set to low speed and
intensity. You can adjust the speed or intensity of
any program by simply pressing those buttons.
Power
Press power button to engage the massage
system. The red LED above the power button
will illuminate telling you it's activated. Once you
press power, all over Steady massage will activate
in medium intensity. Each body zone has two
LED lights and they will illuminate when that body
part is being massaged. Simply press the power
button again to turn the unit off.
Note: The unit will automatically shut off 15
minutes after the last function selected. Simply
press the power button to turn the unit back on.
1 0
Demo
To activate a brief preset program of
massage functions
Intensity
To adjust the strength of the massage
Speed
To adjust the speed of the massage
Zones
Neck & Shoulders
Upper Back
Lower back
Seat
Calves
Heat
To activate the heat function
Programs
To activate the three massage programs,
Up and Down, Side to Side and Pulsating.
Power
To turn the massage recliner on or off.
1 1