Before Installation - Westbend AG028PLV Manual De Instrucciones

Ocultar thumbs Ver también para AG028PLV:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

R e m o v e a l l p a c k i n g m a t e r i a l a n d
accessories. Examine the oven for any
damage such as dents or broken door. Do
not install if oven is damaged.
1. Select a level surface that provide
enough open space for the intake
and/or outlet vents.
12 inch(30 cm)
0cm
8 inch(20cm)
8 inch(20cm)
min
36 inch
(91.6cm
A minimum clearance of 8.0 inches(20cm)
is required between the oven and any
adjacent walls. One side must be open.
(1) The minimum installation height is
36 inches (91.6cm); Leave a minimum
clearance of 12 inches (30cm) above
the oven.
(2) Do not remove the legs from the
bottom of the oven.
(3) Blocking the intake and/or
outlet openings can damage the oven.
English-8

Before Installation

Installation
Cabinet: Remove any protective film found
on the microwave oven cabinet surface.
Do not remove the light brown Mica
cover that is attached to the oven cavity
to protect the magnetron.
(4) Place the oven as far away from radios
and TV as possible. Operation of microwave
oven may cause interference to your radio or
TV reception.
2. Plug your oven into a standard
household outlet. Be sure the voltage and
the frequency is the same as the voltage
and the frequency on the rating label.
WARNING: Do not install oven over a range
cooktop or other heat-producing appliance. If
installed near or over a heat source, the oven
could be damaged and the warranty would
be void.
The accessible surface
may be hot during
operation.

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Westbend AG028PLV

Tabla de contenido