Allen + Roth VICTORIA HARBOR LP8242LCH Manual Del Usuario página 11

WIRING INSTRUCTIONS
3. Slide the receiver unit (N) into the open end of
the hanger bracket (B).
4. Connect green wires from hanger bracket (B)
and downrod (C) to bare (ground) wire using wire
connector (CC). Connect black wire from
receiver unit (N) marked "AC IN L" to black
supply wire using wire connector (CC). Connect
white wire from receiver unit (N) marked "AC
IN N" to white supply wire using wire connector
(CC). Connect white wire from receiver unit (N)
marked "TO MOTOR N" to white wire from fan
using wire connector supplied with receiver unit
(N). Connect black wire from receiver unit (N)
marked "TO MOTOR L" to black wire from fan
using wire connector supplied with receiver unit
(N). Lastly, connect blue wire from receiver unit
(N) to the blue fan light wire using wire connector
supplied with receiver unit (N).
WARNING
Check to see all connections are tight,
including ground, and no bare wire is visible
at the wire connectors except for the ground
wire. Do not operate fan until the blades are in
place. Noise and motor damage could result.
Hardware Used
Wire
CC
Connector
x 3
11
3
B
4
CC
N
Blue to Light
Black to Motor
White to Motor
CC
Lowes.com/allenandroth
N
CC
B
C
all