Specifications
Power Requirements
Power Consumption
Dimensions (W x H x D)
Bus Power Supply (USB)
Amplifier
(Total RMS output power)
Design and specifications are subject to change without
notice.
Replacement of battery
About Ferrite Core (Optional)
Wind power cord cable around the ferrite core twice.
CL98-FB.DUSALLK_SIM_ENG_MFL71261042.indd 5
Additional Information
Refer to the main label on
the unit.
Refer to the main label on
the unit.
Approx. 450.0 mm x
167.0 mm x 332.0 mm
(Approx. 17.71 inch x
6.58 inch x 13.07 inch)
5 V 0 500 mA
3,500 W RMS
Caution
y When you use the multiple socket, it is advisable to use
15 A socket. 10 A socket may cause power off due to
lack of power supply.
y Do not place objects on the speakers. It may cause the
objects to fall and make property damage.
y Install the speakers on a firm surface not to slide. The
vibration caused by the strong output can shake and
move the speakers.
y Avoid turning up max volume in a small enclosed space.
The powerful and intense output of the speakers can
shake the ceiling and get the objects in the room falling.
y To protect from hearing damage, keep the sufficient
distance from the speaker. The overwhelming sound
from the speaker may cause a person' s hearing damage.
y Allow more than 20 cm of free space between the
main set and the speakers when you install the main
set on the ground. High sound pressure from the
speakers can make the set vibrate which can disturb
the CD playback.
y Connect the power cord to wall outlet directly if
possible. Or when you use an extension cable, it is
highly recommended to use an extension cable of 110
V / 15 A or 230 V / 15 A, otherwise the unit may not
operate properly because of the lack of power supply.
y Do not overload the extension cord with excessive
electrical load.
Note
y Do not look directly at the light emitting part when the
LIGHTING is turned on.
y If the illumination brightness is glaring, switch on the
room lights or turn off the LIGHTING of the unit.
2020-06-10
4:49:06