Allen + Roth SB6030L-W Manual Del Usuario página 7

INSTALLATION INSTRUCTIONS
6a. Predrill hole using 1/8" drill bit. Screw
flange to all studs after it has been
predrilled to avoid cracking the acrylic.
6b. If you intend to install with Platform
Shower Wall System, the nailing
flange of the base should be attached
directly to the bare studs with backer
board attached to the studs above the
nailing flange. Wall materials are
installed on the backer board extending
down in front of the nailing flange and
resting on the base. Failure to install
your base in this configuration may
cause problems with installation of the
Platform Shower Walls or other wall
covering materials.
6a
6b
Shower Wall
Backer Board
Nailing Flange
Shower Base
7
Stud
A