sunjoe TJ600E Manual Del Operador página 8

Fig. 3
Screws
Back View
3. Push the power cable into the cable guide located on the
plastic cross plate (Fig. 4).
Fig. 4
Cable guide
4. Position the upper handle assembly onto the motor
housing assembly aligning the holes (Fig. 5).
Fig. 5
Plastic cross plate
Upper
handle
Motor
housing
assembly
3. Secure the upper handle to the lower handle using the
knobs and bolts. Tighten the knobs on each side to ensure
a secure fit (Fig. 6).
Fig. 6
Knob + bolt
4. Secure the power cable to the unit body by using the
cable clips. Use one clip above the plastic cross plate and
the second below the plastic cross plate (Fig. 7).
Fig. 7
Cable clip
Power cable
Cable clip
m
WARNING!
Make sure all handle knobs are properly
tightened before using the electric tiller + cultivator.
8
Upper
handle
Lower
handle
Plastic
cross
plate