Before First Use - MAXI-MATIC Elite PLATINUM EGC-207 Manual De Instrucciones

Ocultar thumbs Ver también para Elite PLATINUM EGC-207:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BEFORE FIRST USE

1.
Rinse all removable parts in hot, soapy water. DO NOT submerge body in any liquids.
Base can be wiped clean with a damp cloth. Please refer to the Cleaning Instructions
for more information.
2.
Place poaching tray, measuring cup, bowl, lid and egg rack next to the unit.
CAUTION: Piercing pin is on the base of the cup and is extremely sharp.
3.
Position the egg rack over the base. The side handles should be facing upward.
4.
Place the shell lid over the cooking tray.
5.
Plug in the power cord. Your egg cooker is now assembled for use.
 Before initial use of the egg cooker, fill the measuring cup to the "Hard" level and
pour onto the heating plate. Do not place Egg Rack or Eggs inside the egg cooker.
Place Cover over the cooker and turn on Power button. The indicator light will turn
off once the Cooker stops heating. You will only need to do this ONE time. You can
now use your Egg Cooker to cook eggs.
NOTES AND TIPS #1
Refrigerate eggs until ready to use. Always use cold eggs – do not bring them to
room temperature before using or the eggs will be slightly overcooked.
HOW TO USE YOUR EGG COOKER
SOFT, MEDIUM AND HARD-BOILED EGGS
1.
Place Egg Cooker appliance on a clean, dry surface.
2.
Remove lid and all other removable parts.
3.
Fill the measuring cup (Figure 1) to the appropriate line. For
best results, use distilled water- tap water contains minerals
that can cause eggs to discolor.
4.
Pour cold water into heating plate.
5.
Rinse the number of eggs desired- cook up to 7 eggs at a time.
6.
Place the egg rack over the base of the unit. The side handles
should be facing upward.
7.
Using the piercing pin located under the cup, pierce a hole on the larger end of the
egg and place on egg rack with the holes facing up to reduce leaking, cracking or
popping. Do not let the eggs touch the heating plate. Rinse pin after use.
8.
Place lid on top of the unit and push the POWER button.
9.
When the water is completely evaporated, the eggs will be cooked.
NOTE: 1-4 eggs cook in approximately 9-10 minutes.
10. When cooking is complete, the power and indicator light will both turn off.
11. Remove eggs immediately and rinse under cold water to prevent overcooking.
NOTES AND TIPS #2
Use distilled water for best performance and to reduce discoloration on the heating
plate.
Questions? We're here to help! Visit: www.maxi-matic.com for support on this product.
Figure 1
4

Publicidad

Tabla de contenido
loading

Tabla de contenido