Operation; Starting; Feeding Procedure - Skymsen SILENZIO Manual De Instrucciones

3. OPERATION

3.1 Starting

- Place the Plug into the Socket.
- To start the equipment just press the On / Off / Pulse Switch n°05 (Pic.01) to the "I"
position
- To turn the equipment off just press the On / Off / Pulse Switch n°05 (Pic.01) to the "O"
position.

3.2 Feeding Procedure

Before using the machine all parts that get in contact with food must be washed with
running water and neutral soap. To clean your Blender read item 3.4 Cleaning.
Check and make sure that the equipment is firm and levelled on its working place.
Remove the Lid along with its cap.
With the equipment switched OFF place inside the cup first the liquid ingredients of the
receipt, then drop the more consistent products.
IMPORTANT
Cut the product in small pieces approximately 3.5 cm wide , it will help to reduce
the blending time particularly with frozen products. When processing ice , it is
obligatory to add some water.
Consider the maximum level indicated on the Cup, as shown on Pic.05 below
PICTURE 05
01
10