Operation; Using The Remote Control - Home Decorators Collection Silverthorne MTVSC2513SE-2 Guía De Uso Y Cuidado

operation

1

Using the remote control

NOTE: the main power button (5) on the firebox must be
turned on for the remote control to function .
□ Press the power button (1) on the remote control (n) . the
flame effect will turn on .
□ Press the flame "+" or flame "–" button (2) to achieve the
desired effect (no heat) .
□ Press the heat button (4) once for "low" or twice for "high"
to achieve the desired level . Press the button a third time
to turn the heating cycle off .
NOTE: the flame effect is always active when the heating
cycle is operational .
□ to illuminate the firebox, press the light button (3) .
3
n
2
Using the manual control
□ to turn the firebox on and off, press the main power
□ Press the power button (1) on the control panel (P) . the
□ Press the flame "+" or flame "–" button (2) to achieve the
□ Press the heat button (4) once for "low" or twice for "high"
□ to illuminate the firebox, press the light button (3) .
1
4
2
P
12
switch (5) .
flame effect will turn on .
desired effect (no heat) .
to achieve the desired level . Press the button a third time
to turn the heating cycle off .
NOTE: the flame effect is always active when the heating
cycle is operational .
1 3 2 2 4 5