Remote Control Operation; Testing Your Fan - stori Epilogue Guia De Instalacion

11. Remote Control Operation.

to control fan speed
button
- turns fan to HIGH speed
button
- turns fan to MEDIUM speed
button - turns fan to LOW speed
button - turns fan OFF
to control light brightness
- This button not applicable for this fan -

12. Testing Your Fan.

It is recommended that you test fan before
finalizing installation. Test fan speeds with the
different fan speed buttons on the remote
control transmitter. (For more detailed
information on using remote control, see
Section 11 above.)
If the transmitter operates all of the functions
of the fan, battery has been installed correctly.
If fan does not function, please refer to
"Troubleshooting" section to solve any issues
before contacting Customer Service.
Turn fan completely off before moving the
reverse switch (located on top of motor
housing.) Set reverse switch to recirculate air
depending on the season:
- LEFT position in summer (diagram 1)
- RIGHT position in winter (diagram 2)
A ceiling fan will allow you to raise your
thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
Important: Reverse switch must be set either
completely to the LEFT or completely to the
RIGHT for fan to function. If the reverse switch
is set in the middle position (diagram 3), fan
will not operate.
NOTE: Do NOT remove weatherproof cover
from reverse switch.
diagram 1
diagram 2
page 8
weatherproof cover
for reverse switch
motor
housing
reverse switch
diagram 3