General Power Tool Safety Warnings; General Instructions For Hot Air Blower - Parkside PUV 2000 B1 Traducción Del Manual De Instrucciones Original

Ocultar thumbs Ver también para PUV 2000 B1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

General Power Tool
Safety Warnings
WARNING!
Read all safety warnings and all instructions .
Failure to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains­operated (corded) power tool or battery­
operated (cordless) power tool .
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock .
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entan­
gled cords increase the risk of electric shock .
If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock .
Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired .
Risk of burns caused by hot surfaces!
Do not touch!
Protect from rain and moisture!
Outlet temperature at the nozzle
max . 650 ° C!
Unplug the appliance immediately if
the cable is damaged or has been cut .
PUV 2000 B1
General instructions
for hot air blower
This appliance may be used by
children aged 8 years and above
and by persons with limited phys­
ical, sensory or mental capabilities
or lack of experience and knowl­
edge, provided that they are under
supervision or have been told how
to use the appliance safely and are
aware of the potential risks . Chil­
dren may not play with the appli­
ance . Cleaning and user mainte­
nance tasks may not be carried out
by children unless they are super­
vised .
To avoid potential risks, damaged
mains cables should be replaced
by the manufacturer or the manu­
facturer's customer service depart­
ment or a similarly qualified person .
NOTE
Spare parts not listed (such as switches and
replacement nozzles) can be ordered via our
call centre .
GB │ MT
 33

Publicidad

Tabla de contenido
loading

Tabla de contenido