Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
KNOWYOURPRESSURE W ASHER
Read the Operator's Manual and safety rules before operating your pressurewasher.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments.
Save this manual for future reference.
A - Spray Gun-- Controls the application of water onto cleaning
surface with trigger device. Includes trigger lock.
B - PrecisionSpray
TM
Nozzles-- Max, General, Flush, Jet Soap and
Detergent Nozzles:for various cleaning applications.
C - AccessoryTray -- Provides convenient storage for accessories,
such as gun, spray tips, etc.
D - Project Pro® PerfectlVlix
TM
Siphon -- Mixes concentrate with
pressure washer spray.
E - Bottle Bracket -- Cleaning solution bottle fits in wire form
bracket here. Concentrate bottle not included.
F - Oil Fill/Dipstick -- Check, add and drain engine oil here.
G - Automatic Cool Down System -- Cycles water through pump
when water reaches 125°-155°F. Warm water will discharge from
pump onto ground. This system prevents internal pump damage.
H - Pump -- Develops high pressure.
J - DetergentSiphoning Tube/Filter--
Useto siphon pressure washer
safe detergentsinto the low pressurestream.
K - High Pressure Outlet -- Connectionfor high pressure hose.
L - Water Inlet -- Connection for garden hose.
IVi- Air Filter -- Protects engine by filtering dust and debris out of
intake air.
N - Recoil Starter -- Used for starting the engine manually.
P - Fuel Tank -- Filltank with regular unleaded fuel. Always leave
room for fuel expansion.
R - Fold Down Handle-- Handle and accessory tray fold fiat atop
cold engine for space-saving storage.
S - Nozzle Extensionwith QuickConnect -- Allows you to switch
betweenfive different PrecisionSpray
TM
nozzles.
T - Hose Wrap and High PressureHose-- Hose wrap provides
easy transport and handling of the high pressure hose. Connect
one end of hoseto water pump and the other end to spray gun.
items Not Shown:
Fuel Valve -- Usedto turn fuel supply on and off to engine.
Engine Switch -- Sets engine in starting mode for recoil starter and
stops a running engine.
Choke Rod -- Prepares a cold engine for starting.
identification Label (near rear of base plate) -- Provides model
and serial number of pressure washer. Pleasehave these readily
available if calling for assistance.
Warning/Operating Instructions Tag -- Identifies hazardsand proper
procedure to start/stop pressure washer.
Publicidad
Tabla de contenido
