Hama Superb Instrucciones De Uso página 5

If you press JOG button one time, a number is chosen and
the next cursor is displayed.
After inputting a phone number like above, press JOG
button for about 2 seconds then a phone number shall be
stored and the cursor is shown.
Move JOG button left and right to search an alphabet,
and then press JOG button again to select.
After inputting the name following above step, terminate
the menu mode by pressing JOG button for about 2
seconds after storing the name.
If you press END button before storing above
menu mode, a menu mode is released.
3. Touche d'appel rapide
Press JOG button for about 2 seconds to enter the menu
mode. Move JOG button left and right to search the
hotline menu. Press JOG button one time then hotline list
is displayed.
You can store a number in the same way as the
Phonebook's.
• EDITING A QUICK DIAL NUMBER
Press Quick Dial button for 3 seconds to edit a Quick Dial
number. Then, the stored number is displayed while the
cursor blinks on the last character. When you put the
cursor on a specifi c character and push TALK button
shortly, the character is out as the cursor
moves. You can set a new number in the same way as the
Phonebook's.
PHONEBOOK DOWNLOADING
1. DELETINGING THE SELECTED PHONEBOOK
Move left JOG button and 'SELECT LETTER' will be shown
on LCD followed by the display of "A". Move JOG button
right and left to select the fi rst alphabet of desired name,
and then push JOG button shortly. "SEARCHING" shall be
displayed on LCD. If there is the name starting with the
desired alphabet, the phone number is shortly displayed
and the name appears. Press TALK button
seconds to delete a selected phonebook list.
2. EDITING THE SELECTED PHONEBOOK
Move left JOG button and 'SELECT LETTER' will be shown
on LCD followed by the display of "A". Move JOG button
right and left to select the fi rst alphabet of desired name,
and then push JOG button shortly. "SEARCHING" shall be
displayed on LCD. If there is the name starting with the
8
00089385bda.indd Abs2:8-Abs2:9
desired alphabet, the phone number is shortly displayed
and the name appears. Press JOG button one time to edit
a selected phonebook list. Then, the stored number is
displayed while the cursor blinks on the last character.
When you put the cursor on a specifi c character and
push TALK button shortly, the character is out
as the cursor moves. You can set a new number in the
same way as the Phonebook's.
Phonebook downloading
Be noted that the mobile phone must support 'Object
Push Profi le' to use this function. Contact is downloaded
one by one.
1. Open LCD folder up while END button pressed, and
'OBJECT PUSH' shall be displayed on LCD. (This state
is discoverable and connectable)
2. Search the phone number in a mobile phone to send
and follow the method guided by your own mobile
phone for sending the number. Pin Code is '0000'.
3. After setting up the connection in the phone
("CONNECTED" shall be displayed on LCD), the phone
number is automatically sent ("DOWNLOADING" shall
be displayed on LCD) and disconnection is done. (After
"COMPLETED" is displayed on LCD, "OBJECT PUSH"
shall be displayed)
4. Close LCD folder to power off and reopen to pair
Handsfree Kit with your mobile phone.
5. Follow the method of pairing and connecting your
mobile phone with Handsfree Kit.
• MAKING A CALL TROUGH THE PHONEBOOK
Move left JOG button and 'SELECT LETTER' will be
shown on LCD followed by the display of "A". Move
JOG button right and left to select the fi rst alphabet
of desired name, and then push JOG button shortly.
"SEARCHING" shall be displayed on LCD. If there is
the name starting with the desired alphabet, the
phone number is shortly displayed and the name
appears. (If you move JOG button right and left again,
you can search the next name starting with the desired
for 3 alphabet.) Press TALK button to make a call.
RESETTING THE PHONEBOOK
It takes about 2 minutes and 30 seconds to reset the
phonebook.
Push END button in connectionless state until 'RESET
PHBOOK' will be shown on LCD. (about 15 seconds)
Handsfree Kit reset the phonebook and "RESETTING"
shall be displayed on LCD.
After the phonebook reset is completed, Memory test
begins. "TESTING" shall be displayed on LCD.
After memory test is completed, "HAMA SUPERB" shall
be displayed on LCD.
Registration and Safety Certifi cation/General
Information
This device bears the CE symbol as specifi ed by the
provisions of Directive R & TTE (1999/5/EC).
Hama GmbH & Co. KG hereby declares that this device
is in compliance with the basic requirements and other
relevant guideline and regulations of the 1999/5/EC
guideline. You will fi nd the declaration of compliance and
declaration of conformity in the Internet at http://www.
hama.com
9
13.06.2007 13:58:26 Uhr