Manuales relacionados para Bush Business Furniture DKR
Resumen de contenidos para Bush Business Furniture DKR
- Página 1 ASSEMBLY INSTRUCTIONS 72" WIDE TALL OVERHEAD RISER Lot Code # NEED HELP? Call 1−800−950−4782 www.bushbusinessfurniture.com Part Number A169176A Keep manual for future reference.
-
Página 2: Important Safety Information
IMPORTANT SAFETY INFORMATION A169176A WARNING Attach hutch as described in the assembly instructions. Improper hutch attachment could cause instability, product collapse, and/or WARNING serious injury. This hutch is intended to be Conecte la alacena según es attached to base units that are descrito en las instrucciones de interconnected. -
Página 3: Exploded View
EXPLODED VIEW A169176A 22HRT72AC 22HRT72MR [ 1 ] S171273 [ 1 ] S171265 D [ 1 ] S171275 D [ 1 ] S171267 [ 1 ] S171279 [ 1 ] S171271 [ 1 ] S171890 [ 1 ] S171889 22HRT72CS 22HRT72MC [ 1 ] [ 1 ]... - Página 4 FASTENERS /HARDWARE A169176A Fasteners are shown in actual size. los fijadores son demonstrados en su tamaño actual. les attaches sont montrées dans l'échelle grandeur. [ 10 ] H23370 #10 x 1-1/4" [ 2 ] H38022 KD Bolt [ 2 ] H147659 Grommet [ 4 ]...
- Página 5 MODEL SPECIFIC A169176A 22HRT48MR 22HRT48AC [ 18 ] H171231 [ 18 ] H171234 Cover Cap Cover Cap 22HRT48MC 22HRT48CS [ 18 ] [ 18 ] H146965 H146969 Cover Cap Cover Cap...
- Página 6 ATTENTION A169176A Common assembly techniques. Técnica común de ensamblaje. Techniques communes d’assemblage. −Panel to panel attachment. −Fijación de tablero con tablero. −Fixation d’un panneau à l’autre...
- Página 7 A169176A STEP CAUTION , hutch can not be repositioned, once set on work surface. Attachment procedure: -Clean surface with window cleaner and let it completely dry. -Remove release paper. -Align hutch as shown on next page(s) before setting it on work surface. -Once hutch is attached, tap firmly with hand to insure tape makes full contact.
- Página 8 A169176A STEP [ 2 ] H38022 KD Bolt [ 4 ] Cover Cap 22HS72...
- Página 9 A169176A STEP An assistant is required. Es necesario un ayudante. Un assistant est nécessaire.
- Página 10 A169176A STEP [ 2 ] Cover Cap An assistant is required. Es necesario un ayudante. Un assistant est nécessaire. Tilt at an angle and then install. Incline hacia un ángulo e instale. Inclinez à un angle et ensuite installer.
- Página 11 A169176A STEP [ 3 ] H23370 #10 x 1-1/4" An assistant is required. Es necesario un ayudante. [ 6 ] Un assistant est nécessaire. Cover Cap...
- Página 12 A169176A STEP An assistant is required. Es necesario un ayudante. [ 3 ] H23370 Un assistant est nécessaire. #10 x 1-1/4" [ 6 ] Cover Cap...
- Página 13 A169176A STEP [ 4 ] H23370 #10 x 1-1/4"...
- Página 14 A169176A STEP List of aproved mounting configurations. List del las configuraciones de montaje aprobades. Liste de configurations approuvées de montage. Hutch / Overhead La parte superior Huche / Stockage supérieur Work / Secondary surface Superfice de trabajo / Secundaria Surface de travail / Secondaire Hutch / Overhead Hutch / Overhead La parte superior...
- Página 15 A169176A STEP...
- Página 16 A169176A STEP Notice: Hutch cannot be moved after being set in place. Ensure alignment before setting hutch into final position. Attention: L'huche ne çeut pas être d éplacée après qu'elle ait été placée en place. Assurez l'alignment approrié avant d placer l'huche en positon finale. Aviso Atención: El aparador no puede ser movido después de ser fijado en su lugar.
- Página 17 A169176A STEP [ 2 ] H147659 Grommet...
- Página 18 A169176A STEP [ 2 ] H77351 Bumper 22HS72...
- Página 19 A169176A STEP [ 2 ] H77351 Bumper 22HS72...
- Página 20 A169176A STEP Maximum Weight: 35 Lbs. Peso Máximo: 35 Libras Poids Maximum: 15 kilogramme Maximum Weight: 0 Lbs. Peso Máximo: 0 Libras Poids Maximum: 0 kilogramme Maximum Weight: 32 Lbs. Peso Máximo: 32 Libras Poids Maximum: 14 kilogramme...