Publicidad
Idiomas disponibles
Idiomas disponibles
QUICK GUIDE
SPECIFICATIONS
Model
Frequency range
RF power
RF stability
Functions
Monitoring with
Connector
Control
Battery
Autonomy
Charge
Dimensions
Weight
Finish
MI-PMU16 Version 1.0
MI-PMU16
823 ~ 832 MHz & 863 ~ 865 MHz
10 mW / 50 mW
< ±10 kHz @ Fc
± 48 kHz
< -50 dB
Sensitivity, RF power, Low Cut filter, auto OFF & battery level
LCD + LED
Mini XLR 4 pin
Power switch, mute, group, channel, frequency, sensitivity, input
attenuation & auto OFF
2 AA alkaline or rechargeable batteries
13 ~ 14 h (alkaline batteries)
Yes
116 mm (width) x 450 mm (height) x 138 mm (depth)
725 g (without batteries)
Metal dark grey
1/2
WIRELESS MICROPHONE DESK
MI-PMU16
At ATTENTION:
Make sure the power source conforms to the power
requirements before connecting the equipment.
Do not install the unit near heat sources.
Only qualified service personnel should be allowed to
install and operate the unit.
1.
Power switch. The centre position turns the unit on, the right one
locks the keys except the talk one.
2.
Microphone connector.
3.
Status LED.
4.
LCD display.
5.
Mic open LED indicator.
6.
SET button. Adjust the parameters including group, channel,
frequency, sensitivity, RF power, Low Cut filter and Auto OFF.
7.
Up/down keys.
8.
Talk key.
9.
Charging terminal.
10. Battery case. 2 AA batteries.
Publicidad
